Can working under AC power source only;
Low voltage electric shock can melt the needle instantly; mechanic cutting can melt syringe body, double overheating protection is provided;
Feature: Can working under AC power source only; Low voltage electric shock can melt the needle instantly; mechanic cutting can melt syringe body, double overheating protection is provided; There will be little electrical spark which is normal during melting; Indicator light sparks during melting, showing the needle is under destroying, the whole process cost only 1 to 3 seconds. Destroy Needle specifications 30G---34G
Specification: Power: AC 110V±10%/220V±10%; Melting method: melt with low pressure, high temperature; Working time: can destroyer around 240 continuously (take 20ml syringe body as reference) Working noise:≤50 dB Electrode chip working voltage: AC 8V Power: <130VA Electrode chip overheating protection temperature: 85℃
Technical Specification:
Infusion rate range
Adjustable drop rate range: 1 /min~400 drops/min
(step: 1 drop /min)
Adjustable flow rate range: 1ml/h~1200ml/h
(step 0.1ml/h)
Purge rate: 800ml/h
KVO rate: 1ml/h (less than 100ml/h)
2ml/h (100~300ml/h)
3ml/h (greater than 300ml/h)
Infusion volume range: 1ml~9999.9ml (step: 0.1 ml)
Maximum accumulated volume: 9999.9ml (step: 0.1 ml)
Infusion Time range: 1min~9999min (step: 1 min)
Infusion accuracy: Within ±3% (using calibrated high quality IV set)
Mechanical precision: within ±2%